Comments for Beyond Real http://www.beyondreal.com Information Technology Solutions Sat, 21 Jan 2012 06:17:52 +0000 hourly 1 http://wordpress.org/?v=3.3.1 Comment on (Italiano) La mia esperienza con Linkem by dangelo massimo http://www.beyondreal.com/en/2011/07/06/la-mia-esperienza-con-linkem/#comment-212 dangelo massimo Sat, 21 Jan 2012 06:17:52 +0000 http://www.beyondreal.com/?p=106#comment-212 Come il signore di Ragusa, anch'io lamento il problema di connessione, e da quando ho sottoscritto il contratto, si verificano quasi quotidianamente problemi di connessione. Se mi rivolgo al numero verde, mi fanno fare prove tecniche che non servono a nulla, La ditta che mi ha installato linkem, la Elettronica Pelino di Avezzano, sostiene che e' un problema del ripetitore telecom, e stanno cercando di risolverlo....oramai da due giorni. Vi chiedo spiegazioni in merito, o via mail, o al mio numero di cellulare 3297168036- Mi auguro che l'inconveniente venga risolto in giornata, altrimenti mi vedro' costretto a rescindere il contratto. Faccio presente che attualmente sto navigando su internet con chiavetta telecom a mie spese, perche' internet mi occorre per motivi di lavoro. Con l'occasione ringrazio ed ossequio Come il signore di Ragusa, anch’io lamento il problema di connessione, e da quando ho sottoscritto il contratto, si verificano quasi quotidianamente problemi di connessione. Se mi rivolgo al numero verde, mi fanno fare prove tecniche che non servono a nulla, La ditta che mi ha installato linkem, la Elettronica Pelino di Avezzano, sostiene che e’ un problema del ripetitore telecom, e stanno cercando di risolverlo….oramai da due giorni. Vi chiedo spiegazioni in merito, o via mail, o al mio numero di cellulare 3297168036- Mi auguro che l’inconveniente venga risolto in giornata, altrimenti mi vedro’ costretto a rescindere il contratto. Faccio presente che attualmente sto navigando su internet con chiavetta telecom a mie spese, perche’ internet mi occorre per motivi di lavoro. Con l’occasione ringrazio ed ossequio

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 by Parthena http://www.beyondreal.com/en/2011/07/21/mac-os-x-lion-e-iomega-storcenter-ix2-200/#comment-189 Parthena Tue, 17 Jan 2012 19:53:30 +0000 http://www.beyondreal.com/?p=147#comment-189 Sharp thnkniig! Thanks for the answer. Sharp thnkniig! Thanks for the answer.

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 – Update by Alessandro Bahgat http://www.beyondreal.com/en/2011/08/02/mac-os-x-lion-e-iomega-storcenter-ix2-200-aggiornamento/#comment-99 Alessandro Bahgat Sun, 18 Dec 2011 10:53:35 +0000 http://www.beyondreal.com/?p=154#comment-99 Now that I think about it, do Time Machine backups over ethernet work as well? Now that I think about it, do Time Machine backups over ethernet work as well?

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 – Update by Alessandro Bahgat http://www.beyondreal.com/en/2011/08/02/mac-os-x-lion-e-iomega-storcenter-ix2-200-aggiornamento/#comment-98 Alessandro Bahgat Sun, 18 Dec 2011 10:48:38 +0000 http://www.beyondreal.com/?p=154#comment-98 Thanks for the article! You really can't imagine how relieved I am now that I know there's a solution to this issue: I will upgrade shortly, then! Thanks for the article!
You really can’t imagine how relieved I am now that I know there’s a solution to this issue: I will upgrade shortly, then!

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 – Update by Lorenzo La Rocca http://www.beyondreal.com/en/2011/08/02/mac-os-x-lion-e-iomega-storcenter-ix2-200-aggiornamento/#comment-65 Lorenzo La Rocca Wed, 23 Nov 2011 09:33:57 +0000 http://www.beyondreal.com/?p=154#comment-65 Ciao Daniele, non credo che questa procedura riabiliti anche time machine, serve principalmente per riabilitare il protoccolo afp... per la compatibilita' con time machine credo si dovra' aspettare un aggiornamento, che forse da quanto leggo in uno dei commenti e' gia' arrivato. Ciao Daniele,
non credo che questa procedura riabiliti anche time machine, serve principalmente per riabilitare il protoccolo afp… per la compatibilita’ con time machine credo si dovra’ aspettare un aggiornamento, che forse da quanto leggo in uno dei commenti e’ gia’ arrivato.

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 – Update by Daniele http://www.beyondreal.com/en/2011/08/02/mac-os-x-lion-e-iomega-storcenter-ix2-200-aggiornamento/#comment-46 Daniele Mon, 14 Nov 2011 05:57:51 +0000 http://www.beyondreal.com/?p=154#comment-46 Lorenzo, Questa procedura dovrebbe riabilitare anche Timemachine? Io riesco a connettemi allo Storecenter, ma Timemachine non funziona. Lorenzo,
Questa procedura dovrebbe riabilitare anche Timemachine? Io riesco a connettemi allo Storecenter, ma Timemachine non funziona.

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 by Ricardo Parra http://www.beyondreal.com/en/2011/07/21/mac-os-x-lion-e-iomega-storcenter-ix2-200/#comment-21 Ricardo Parra Thu, 29 Sep 2011 13:37:34 +0000 http://www.beyondreal.com/?p=147#comment-21 Hi, Apparently some of the problems with the unit and Lion have been addressed by Iomega with the firmware update... however, I'm having trouble configuring a brand new unit from Lion, apparently without the Storcenter software it's impossible to configure a unit like this for the first time. Should I just get someone with a PC to help me out? I just need to configure the RAID, the folders, upgrade the firmware and configure permissions. By the way, even without the firmware up, I get to see all the folders on the Finder... I use CIF at my job to access some folders, perhaps I'm just accessing them using CIF. Thank you! Best Regards. Hi,

Apparently some of the problems with the unit and Lion have been addressed by Iomega with the firmware update… however, I’m having trouble configuring a brand new unit from Lion, apparently without the Storcenter software it’s impossible to configure a unit like this for the first time.
Should I just get someone with a PC to help me out? I just need to configure the RAID, the folders, upgrade the firmware and configure permissions.

By the way, even without the firmware up, I get to see all the folders on the Finder… I use CIF at my job to access some folders, perhaps I’m just accessing them using CIF.

Thank you!

Best Regards.

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 – Update by Erick http://www.beyondreal.com/en/2011/08/02/mac-os-x-lion-e-iomega-storcenter-ix2-200-aggiornamento/#comment-14 Erick Fri, 26 Aug 2011 17:17:09 +0000 http://www.beyondreal.com/?p=154#comment-14 After trying your instructions a few times with no luck, I re-read the apple article and followed those instructions. Turns out for some reason your commands just removed the quotes around the final protocol. By hand-typing the array command, the final protocol was removed and now it works. After trying your instructions a few times with no luck, I re-read the apple article and followed those instructions. Turns out for some reason your commands just removed the quotes around the final protocol. By hand-typing the array command, the final protocol was removed and now it works.

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 – Update by Lorenzo La Rocca http://www.beyondreal.com/en/2011/08/02/mac-os-x-lion-e-iomega-storcenter-ix2-200-aggiornamento/#comment-6 Lorenzo La Rocca Wed, 10 Aug 2011 14:33:40 +0000 http://www.beyondreal.com/?p=154#comment-6 @Bruno Per favore riprova come segue, togliendo nella terza riga parte del testo, come indicato. In un altro pc non funzionava neanche a me, provando cosi' non ho avuto problemi. sudo chmod o+w /Library/Preferences sudo defaults write /Library/Preferences/com.apple.AppleShareClient afp_host_prefs_version -int 1 sudo defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array sudo chmod o-w /Library/Preferences @Bruno
Per favore riprova come segue, togliendo nella terza riga parte del testo, come indicato. In un altro pc non funzionava neanche a me, provando cosi’ non ho avuto problemi.

sudo chmod o+w /Library/Preferences
sudo defaults write /Library/Preferences/com.apple.AppleShareClient afp_host_prefs_version -int 1
sudo defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array
sudo chmod o-w /Library/Preferences

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 – Update by Bruno http://www.beyondreal.com/en/2011/08/02/mac-os-x-lion-e-iomega-storcenter-ix2-200-aggiornamento/#comment-5 Bruno Wed, 10 Aug 2011 12:26:11 +0000 http://www.beyondreal.com/?p=154#comment-5 Facendo la procedura (ho un ix2-200 collegato a un router wireless) non funziona.... qualcuno sa qualche altra procedura da provare?? Facendo la procedura (ho un ix2-200 collegato a un router wireless) non funziona…. qualcuno sa qualche altra procedura da provare??

]]> Comment on Virtual Desktop by Fabio Ceccarani http://www.beyondreal.com/en/2011/07/10/virtual-desktop/#comment-4 Fabio Ceccarani Wed, 10 Aug 2011 12:25:55 +0000 http://www.beyondreal.com/?p=140#comment-4 Sono interessato a Ulteo e al vostro test. Ciao Sono interessato a Ulteo e al vostro test.
Ciao

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 by Bart Roozendaal http://www.beyondreal.com/en/2011/07/21/mac-os-x-lion-e-iomega-storcenter-ix2-200/#comment-3 Bart Roozendaal Tue, 09 Aug 2011 11:50:35 +0000 http://www.beyondreal.com/?p=147#comment-3 Thanks for this. This at least gives me some access to the NAS. Thanks for this. This at least gives me some access to the NAS.

]]> Comment on Mac OS X Lion and Iomega StorCenter ix2-200 by Lorenzo La Rocca http://www.beyondreal.com/en/2011/07/21/mac-os-x-lion-e-iomega-storcenter-ix2-200/#comment-2 Lorenzo La Rocca Fri, 22 Jul 2011 22:21:51 +0000 http://www.beyondreal.com/?p=147#comment-2 As a reader pointed out, I have not indicated a way to use cifs: in finder, under the menu "Go" choose the item "Connect to server", then in the window that appears fill in the address field with "cifs://xxx.xxx.xxx.xxx" where xxx.xxx.xxx.xxx is the IP Address of the NAS. Then Connect. This is valid for any NAS that supports CIFS, not just Iomega ix2-200. As a reader pointed out, I have not indicated a way to use cifs: in finder, under the menu “Go” choose the item “Connect to server”, then in the window that appears fill in the address field with “cifs://xxx.xxx.xxx.xxx” where xxx.xxx.xxx.xxx is the IP Address of the NAS. Then Connect.
This is valid for any NAS that supports CIFS, not just Iomega ix2-200.

]]>